fmscales Dynamic Belt Feeder Weighing Controller Weigh Feeder Controller for Stone Mining Counts Total Weight — B2B BST100-B11 LED dynamic belt-feeder controller selection; exact model and application fit confirmed before quotation.
Belt Scales · Configuration reviewed before quotation
Reviewed product imagery identifies this LED belt-weigher controller as BST100-B11. The retained record is aimed at dynamic belt-feeder measurement with AC220V power, IP65 front-panel protection, up to eight load cells, three digital inputs, four relay outputs and RS232/RS485 communication; request the current B11 datasheet before design use.
Capacity and option guidance
Application route
Operating workflow
Model confirmation
| Parameter | Specification |
|---|---|
| Max connect | 8Loadcells |
| Open Swith Input | 3DI |
| Open Repay Output | 4DO |
| Protection level of front panel | IP65 |
| Accuracy Grade | 0.5 |
| Accuracy of Flow Control | 0.5%~1.0% |
| COM1 | RS232/RS485 |
| COM2 | RS232 |
| Power Supply | AC220V |
The B11 master represents the physical controller shown in both reviewed listing records. One source title names B21, but its images show B11, so that conflicting title is retained only in the evidence layer and does not create a competing page.
Use the parameter set to check panel power, load-cell capacity, relay logic and communication. It does not establish the conveyor mechanics, speed-sensor route or installed-system performance by itself.
Supply belt width and speed, flow range, material, feeder control sequence, host interface and calibration plan before quotation.
2 reviewed configurations are organized under this model page. Compare each configuration title, technical fields and approved imagery before confirming the exact quotation.
Configuration title: fmscales Dynamic Belt Feeder Weighing Controller Weigh Feeder Controller for Stone Mining Counts Total Weight
| Parameter | Reviewed value |
|---|---|
| Max connect | 8Loadcells |
| Open Swith Input | 3DI |
| Open Repay Output | 4DO |
| Protection level of front panel | IP65 |
| Accuracy Grade | 0.5 |
| Accuracy of Flow Control | 0.5%~1.0% |
| COM1 | RS232/RS485 |
| COM2 | RS232 |
| Power Supply | AC220V |
3 approved images represented in the model gallery.
Configuration title: fmscales Feeder Weighing Controller for Belt Scale BST100-B21, LED Display Belt Weigher Indicator
| Parameter | Reviewed value |
|---|---|
| Max connect | 8Loadcells |
| Open Swith Input | 3DI |
| Open Repay Output | 4DO |
| Protection level of front panel | IP65 |
| Accuracy Grade | 0.5 |
| Accuracy of Flow Control | 0.5%~1.0% |
| COM1 | RS232/RS485 |
| COM2 | RS232 |
| Power Supply | AC220V |
4 approved images represented in the model gallery.
Use this checklist when requesting the current datasheet and quotation for fmscales Dynamic Belt Feeder Weighing Controller Weigh Feeder Controller for Stone Mining Counts Total Weight. It records the information that must be confirmed; it does not substitute unverified values for the final model.
Product-specific focus: BST100-B11: Confirm BST100-B11 identity, Belt and feeder operating data, Load-cell and speed inputs.
| Selection checkpoint | Information to confirm before order |
|---|---|
| Primary application data | Purpose: monitoring, inventory, control or trade |
| Mechanical compatibility | Material, density, particle size and environment |
| Load and operating envelope | Minimum, normal and maximum flow |
| Measurement workflow | Belt width, speed, incline and idler geometry |
| Site and integration conditions | Installation straight length and interference points |
| Verification and responsibility | Calibration method, outputs, PLC/DCS and responsibility |
Continue browsing the catalog or open a quick inquiry.
View product details
Keypad controller route for a continuous conveyor belt scale, with local flow-rate, accumulated-total and belt-speed readouts visible in the product image.
View product details
Panel-display controller route for a continuous conveyor belt scale, with statistics and data-management screens visible in the product image.
![Digital Load Cell Controller with 0-20mA , Weighing Force Indicator Instrument BST106-B60S[L]](/assets/products/catalog-20260825/fm-mw-002/fm-mw-002-01-card-400.webp)
View product details
BST106-B60S[L] is represented here as a panel-mount force-measurement and load-cell controller. The reviewed cluster records 0-20mA analogue output, RS232 and RS485 communication, two relay outputs, an IP65 front panel and support for up to eight load cells; confirm the exact enclosure and output scaling before quotation.
View product details
Beam load-cell route with a listed 500–3000 kg family range for scale integration; the exact capacity, load introduction and mounting require model confirmation.
Answers cover the reviewed BST100-B11 configurations organized on this model selection route.
It combines measured belt load with belt movement to calculate flow and accumulated total; the conveyor, weigh frame, speed sensor and integrator form one system. This page currently lists these source-backed selection details: Max connect: 8Loadcells; Open Swith Input: 3DI. The exact model still depends on BST100-B11: Confirm BST100-B11 identity, Belt and feeder operating data, Load-cell and speed inputs.
Send material, flow range, belt width, speed, incline, idler geometry, available straight length, calibration method and required outputs. For this listing, the current max connect is 8Loadcells; also pay particular attention to BST100-B11: Confirm BST100-B11 identity, Belt and feeder operating data, Load-cell and speed inputs.
Complete the mechanical checks, zero checks and the agreed test-weight, chain or material-test procedure under representative flow conditions. The acceptance record for fmscales Dynamic Belt Feeder Weighing Controller Weigh Feeder Controller for Stone Mining Counts Total Weight should identify the max connect as 8Loadcells, plus the exact configuration and BST100-B11: Confirm BST100-B11 identity, Belt and feeder operating data, Load-cell and speed inputs, rather than applying a generic accuracy claim.
Review the conveyor survey sheet, weigh-frame drawing, wiring, integrator manual and calibration method. Match every file to the quoted fmscales Dynamic Belt Feeder Weighing Controller Weigh Feeder Controller for Stone Mining Counts Total Weight model and revision, and verify that the max connect (8Loadcells) and BST100-B11: Confirm BST100-B11 identity, Belt and feeder operating data, Load-cell and speed inputs agree with the ordered configuration.
Not from this page alone. Process monitoring and legal-for-trade conveyor weighing require different evidence and verification methods. The page's max connect (8Loadcells) does not replace exact-model, certificate-scope and local-verification confirmation for BST100-B11: Confirm BST100-B11 identity, Belt and feeder operating data, Load-cell and speed inputs.
Share the application, capacity, quantity, equipment and destination country for fmscales Dynamic Belt Feeder Weighing Controller Weigh Feeder Controller for Stone Mining Counts Total Weight. We will compare those conditions with the reviewed Belt Scales selection fields and identify which exact-model documents still need confirmation.
Start with BST100-B11 and one key operating requirement.
Send your core application details. We will review the request and follow up by email or Tel / WhatsApp.
