High Precision Dynamic Weighing Conveyor Belt Scale Controller BST100-E01 with LCD Display — B2B belt-scale controller selection with Max connect: 8 load cells; Open Switch Input: 3DI; COM2: RS232; model and test conditions reviewed in quotation.
Belt Scales · Buyer selection route
BST100-E01 is a continuous-conveyor weighing controller with an LCD interface. Compare its listed maximum connection of 8 load cells, 3 digital inputs, 4 relay outputs and IP65 front-panel protection with the conveyor signal and cabinet requirements.
Capacity and option guidance
Application route
Operating workflow
Selection checkpoint
| Parameter | Specification |
|---|---|
| Max connect | 8 load cells |
| Open Switch Input | 3DI |
| Open Relay Output | 4DO |
| Protection level of front panel | IP65 |
| Accuracy Grade | 0.5 |
| Accuracy of Flow Control | 0.5%~1.0% |
| COM1 | optional RS232/RS485 |
| COM2 | RS232 |
| Power Supply | AC220V |
Use the listed configuration to evaluate the BST100-E01 configuration for continuous conveyor weighing and controller integration. Its role is defined by the application and control workflow, not by a generic controller label alone.
For comparison with another model, document the intended process measurement, operator display and plant-control interface. The parameter table retains every reviewed buyer-facing field available for this record.
Before ordering, confirm conveyor geometry, speed input, load-cell arrangement, communication ports and calibration method. Any performance value remains conditional on the exact model, installation and agreed verification procedure.
Compare BST100-E01 as dynamic belt scale controller for a surveyed conveyor weighing or control task.
What distinguishes this product: BST100-E01 lists Max connect: 8 load cells; Open Switch Input: 3DI.
The controller does not establish the complete weigh frame, idlers, speed sensing, conveyor condition or installed result.
Compare 1 available configuration by technical fields and product images, then confirm the option that fits your application.
Configuration: High Precision Dynamic Weighing Conveyor Belt Scale Controller BST100-E01 with LCD Display
| Parameter | Current value |
|---|---|
| Max connect | 8 load cells |
| Open Switch Input | 3DI |
| Open Relay Output | 4DO |
| Protection level of front panel | IP65 |
| Accuracy Grade | 0.5 |
| Accuracy of Flow Control | 0.5%~1.0% |
| COM1 | optional RS232/RS485 |
| COM2 | RS232 |
| Power Supply | AC220V |
5 product images shown in the model gallery.
Use this checklist to prepare the equipment and application information needed to match High Precision Dynamic Weighing Conveyor Belt Scale Controller BST100-E01 with LCD Display to your project.
Product-specific focus: BST100-E01, including Max connect: 8 load cells, and the installed operating workflow.
| Selection checkpoint | Information to confirm before order |
|---|---|
| Primary application data | Purpose: monitoring, inventory, control or trade |
| Mechanical compatibility | Material, density, particle size and environment |
| Load and operating envelope | Minimum, normal and maximum flow |
| Measurement workflow | Belt width, speed, incline and idler geometry |
| Site and integration conditions | Installation straight length and interference points |
| Verification and responsibility | Calibration method, outputs, PLC/DCS and responsibility |
Continue browsing the catalog or open a quick inquiry.
View product details
Keypad controller route for a continuous conveyor belt scale, with local flow-rate, accumulated-total and belt-speed readouts visible in the product image.
View product details
Panel-display controller route for a continuous conveyor belt scale, with statistics and data-management screens visible in the product image.
View product details
The wheel loader scale is an intelligent onboard weighing system specially designed for wheel loaders, front-end loaders, and other loading equipment. The system adopts advanced dynamic weighing technology, project-selected pressure sensors, and an intelligent weighing indicator.
Answers cover the available BST100-E01 configurations on this product page.
It combines measured belt load with belt movement to calculate flow and accumulated total; the conveyor, weigh frame, speed sensor and integrator form one system. Key selection details include Max connect: 8 load cells; Open Switch Input: 3DI. Final selection still depends on BST100-E01, including Max connect: 8 load cells, and the installed operating workflow.
Send material, flow range, belt width, speed, incline, idler geometry, available straight length, calibration method and required outputs. For this listing, the current max connect is 8 load cells; also pay particular attention to BST100-E01, including Max connect: 8 load cells, and the installed operating workflow.
Complete the mechanical checks, zero checks and the agreed test-weight, chain or material-test procedure under representative flow conditions. Record the selected configuration, the max connect (8 load cells), BST100-E01, including Max connect: 8 load cells, and the installed operating workflow and the test results for future service and verification.
Review the conveyor survey sheet, weigh-frame drawing, wiring, integrator manual and calibration method. Match every file to the quoted High Precision Dynamic Weighing Conveyor Belt Scale Controller BST100-E01 with LCD Display model and revision, and verify that the max connect (8 load cells) and BST100-E01, including Max connect: 8 load cells, and the installed operating workflow agree with the ordered configuration.
Not from this page alone. Process monitoring and legal-for-trade conveyor weighing require different evidence and verification methods. The listed max connect (8 load cells) does not establish certificate scope, local verification or acceptance for BST100-E01, including Max connect: 8 load cells, and the installed operating workflow.
Share the application, capacity, quantity, equipment and destination country for High Precision Dynamic Weighing Conveyor Belt Scale Controller BST100-E01 with LCD Display. We will compare those conditions with the available Belt Scales options and explain the remaining fit and document requirements.
Start with BST100-E01 and one key operating requirement.
Send your core application details. We will review the request and follow up by email or Tel / WhatsApp.
